I went down to the wreckers and found some forks from a TT-125, they were 10mm longer, I used the internals of these and made a spacer 40mm longer than the one in the Ty forks they seem to feel about the same as the TY forks, just need to get the bike together to see how they go.

Hello Andrew, I got this info. off a Montesa web site some time ago regarding fitting a Mikuni carby to a 247 Cota. They used a 24mm. carby with a 110 main, 2.5 slide, 4F10 needle, 2.0 float needle, 04 212 needle jet with float height of 17-19mm. If you go with the Mikuni the info. might help. With ...

Hello Andrew, just wire it up the way Cedric said and you should have no trouble. Mine goes well, its a bit tempramental trying to start it sometimes but once going its ok. I had trouble with the clutch when I first assembled it but a mate had a spare motor so I swaped parts around and got it ...

Hello Andrew, I met you at Gregs place a couple of weeks ago. I have a condensor mounted under my tank which is a Champion P/No. NC203 which I purchased from Repco. In my TY I have a Bosch P/No. GD206. Both seem to work fine. If you are still having troubles I might be able to get another coil to ...

Hello Keychange, I bougth some .4mm gasket paper from Super Cheap Auto. and made my own gasket with some Permatex. I had similar problems with my 247T, had the side cover off a few times, the gasket was useable again. Regards Graeme.