Not really a product, just something I've made and fitted that seems to work well.
It's common practice to replace the bolts holding the rear mudguard with cable ties or plastic bolts so they break before the guard does when the bike flips.
I got sick of replacing cable ties and still had a little trouble with them either breaking too easily or not easily enough and damaging the guard.
A while ago I made up a small steel bracket bolted to the rear of the subframe/tank, and a pair of magnets in a holder (leftover from a product I used to make) bolted to the mudguard. Now when the guard hits something it flips up but automatically re-connects when it drops back. Works a treat.
This was easy to do on the Sherco, I haven't really looked at how to do it on the GasGas but think it's achievable.
There are rubber coated pot magnets available that would be better for this to avoid corrosion and damage to the magnets. Having the magnets and keeper in a slight Vee configuration would keep the guard perfectly centred, with the flat catch it sometimes ends up a little off centre.
Couple of photos
Magnetic mudguard holder
Moderator: Moderators
-
- B grade participant
- Posts: 72
- Joined: Sun Apr 17, 2016 6:49 pm
- Bike: Montesa, SWM, Ossa
- Club: TMTC
- Location: TASMANIA
Re: Magnetic mudguard holder
Not a bad idea but the expert riders with balls of steel might have a few issues.
Re: Magnetic mudguard holder
Actually, if you mount the magnets the wrong way around they are a completely repellent idea.
-
- Junior participant
- Posts: 2
- Joined: Tue Dec 17, 2019 11:02 am
- Bike: 2006
- Club: -Yet to join
- Location: Geelong
Re: Magnetic mudguard holder
What a great idea! I have some pesky plastics on an enduro bike that could do with this treatment
Who is online
Users browsing this forum: No registered users and 11 guests