Hi
I’m looking to fit a rear brake light switch to Sherco ST 250 (2018) with the objective of getting Victorian Recreational Registration.
Searching the internet for information on how to do this has not been helpful at all. I would greatly appreciate ideas, suggestions and/or advice on how best to go about this including what sort of switch to use etc.
Thanks
Gerald
Rear brake light switch for Sherco ST 250
Moderator: Moderators
- TRIALTECH
- Dealer
- Posts: 109
- Joined: Thu Jun 04, 2009 6:56 am
- Bike: Beta Scorpa Sherco
- Location: Brisbane
Re: Rear brake light switch for Sherco ST 250
can't remember which bike, but something had a hydraulic pressure switch for the rear brake in years gone by...I'll keep searching
Shouldn't be too hard...in fact lots of road bikes etc use a hydraulic pressure switch you can just add into the system. Wiring, you'll have to do yourself
Shouldn't be too hard...in fact lots of road bikes etc use a hydraulic pressure switch you can just add into the system. Wiring, you'll have to do yourself
TRIALTECHMOTO
Qld Scorpa / Sherco / Beta Dealer
New and Used bikes
Workshop (Qualified Mechanic 30yrs experience)
Spares and Accessories
Facebook Messenger 'trialtechmoto'
sales@trialtech.com.au
http://www.ttmoto.com.au
0491.075.653
Qld Scorpa / Sherco / Beta Dealer
New and Used bikes
Workshop (Qualified Mechanic 30yrs experience)
Spares and Accessories
Facebook Messenger 'trialtechmoto'
sales@trialtech.com.au
http://www.ttmoto.com.au
0491.075.653
-
- B grade participant
- Posts: 85
- Joined: Tue Sep 10, 2013 7:51 pm
- Bike: 2002 Sherco 290
- Club: WDTC
Re: Rear brake light switch for Sherco ST 250
If you're good welding or know someone who is. You could go to a bike wrecker and get the brake light switch mount from a busted frame and mount it to your bike. Drill a hole in your lever for the spring and viola, apart from the wiring.
Alternatively, you could see if they have a bike with the hydraulic type and you're off to mod land.
Let us know how you get on
Alternatively, you could see if they have a bike with the hydraulic type and you're off to mod land.
Let us know how you get on
-
- Junior participant
- Posts: 10
- Joined: Tue Dec 12, 2017 3:45 pm
- Club: TMTC
- Location: Penguin, TAS
- Location: Penguin
Re: Rear brake light switch for Sherco ST 250
Thanks very much for the info folks. Much appreciated.
Who is online
Users browsing this forum: No registered users and 17 guests