Hi all, first time poster here,
I have just picked up an RL250 and am chasing some parts and info.
Parts needed so far in order of importance.
*rear brake plate
*side panels
*inlet pipe/rubber hose
Info
*does anyone know where I can buy universal trials guards in Australia
also I have some excess parts that I may sell if anyone needs/wants them
*frame & swingarm
*forks (rusty)
*Hubs (NOS I'm told, painted black)
*Fibreglass RL Beamish side covers in yellow
thanks
Brian
RL250 PARTS NEEDED
Moderator: Moderators
-
Greg Harding
- Golden Basket of Smiles
- Posts: 906
- Joined: Tue Mar 03, 2009 7:33 pm
- Club: LRMTC & SQTA
- Bike: NUMEROUS
Re: RL250 PARTS NEEDED
Hi Everyone,
Brian, I may be able to help you as I have a couple of Basket Cases, definitely have side covers and a rear brake plate. The yellow Beamish side covers are something that I am after, perhaps we could do a swap?
Don Newell in Brisbane and Bultaco parts Australia in Melbourne both stock Gonelli in a multitude of colours!
Brian, I may be able to help you as I have a couple of Basket Cases, definitely have side covers and a rear brake plate. The yellow Beamish side covers are something that I am after, perhaps we could do a swap?
Don Newell in Brisbane and Bultaco parts Australia in Melbourne both stock Gonelli in a multitude of colours!
2017 Newsflash: RUST IS THE NEW BLING !
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
-
PRITCH39
- Junior participant
- Posts: 11
- Joined: Sat Feb 11, 2012 9:23 pm
- Club: Brisbane MCC
- Bike: RL250
Re: RL250 PARTS NEEDED
Sounds good Greg,
I am in Brisbane, I can post the Beamish sidecovers to you if you want, they are in good condition I think they are new just a few scuffs
from sitting around in a box of parts that came with the bike. Have you used the Gonelli guards on your RL?
Brian
I am in Brisbane, I can post the Beamish sidecovers to you if you want, they are in good condition I think they are new just a few scuffs
from sitting around in a box of parts that came with the bike. Have you used the Gonelli guards on your RL?
Brian
-
Greg Harding
- Golden Basket of Smiles
- Posts: 906
- Joined: Tue Mar 03, 2009 7:33 pm
- Club: LRMTC & SQTA
- Bike: NUMEROUS
Re: RL250 PARTS NEEDED
Hi Brian,
Will take some photos of parts and post or email them to you direct early next week, will need your email address if you choose the latter.
Have fitted Gonellis to a couple of bikes, but not a RL yet, have a pair of yellow ones all ready. The front will be easy, but the back RL guard
is longer, on my TY175 which has a similar setup, I retained the TY front part and made the join under the seat.
Could we get some photos of the Beamish side covers please?
Will take some photos of parts and post or email them to you direct early next week, will need your email address if you choose the latter.
Have fitted Gonellis to a couple of bikes, but not a RL yet, have a pair of yellow ones all ready. The front will be easy, but the back RL guard
is longer, on my TY175 which has a similar setup, I retained the TY front part and made the join under the seat.
Could we get some photos of the Beamish side covers please?
2017 Newsflash: RUST IS THE NEW BLING !
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
-
PRITCH39
- Junior participant
- Posts: 11
- Joined: Sat Feb 11, 2012 9:23 pm
- Club: Brisbane MCC
- Bike: RL250
Re: RL250 PARTS NEEDED
Will take photos in the morning, and try to post them here, or I can text photos to your mobile.
-
Greg Harding
- Golden Basket of Smiles
- Posts: 906
- Joined: Tue Mar 03, 2009 7:33 pm
- Club: LRMTC & SQTA
- Bike: NUMEROUS
Re: RL250 PARTS NEEDED
Hi Brian,
Below is a photo of side covers and rear brake backing plate as discussed:
The rubber inlet pipe/hose, are you missing it or is it just hard, one of mine was very hard so I heated it with a heat gun and was able to use it again.
Below is a photo of side covers and rear brake backing plate as discussed:
The rubber inlet pipe/hose, are you missing it or is it just hard, one of mine was very hard so I heated it with a heat gun and was able to use it again.
2017 Newsflash: RUST IS THE NEW BLING !
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
Team Hardwood, the only licenced trials riders in Coffs Harbour!
Miles of Smiles
Greg Harding
-
PRITCH39
- Junior participant
- Posts: 11
- Joined: Sat Feb 11, 2012 9:23 pm
- Club: Brisbane MCC
- Bike: RL250
Re: RL250 PARTS NEEDED
Hi Greg here is a piccy of the side covers. Sorry I took so long, I have been flat out.
Brian
Brian
- Attachments
-