Leaking Betors resolution

Need help finding information or parts for that old machine in your shed? Someone in here will know!

Moderator: Moderators

User avatar
Reinald
A grade participant
A grade participant
Posts: 184
Joined: Wed Sep 09, 2009 11:57 pm
Club: WDTC
Bike: SWM TL320 1982
Location: Springfield

Re: Leaking Betors resolution

Post by Reinald »

Hi I have the new betors and there is some weeping from the get go. Ill talk to SMP to see whats up but I might try Feet up funs pressure check and see if that does the job.
@FM350 do you ride a Virago by any chance?
I'd rather be a D grade participant than an A grade spectator....
FM350
Expert participant
Expert participant
Posts: 488
Joined: Thu Apr 14, 2011 7:04 pm
Club: Otter Vale
Bike: Fantic

Re: Leaking Betors resolution

Post by FM350 »

If you have new Betors and the seals are black rather than blue, then you may well have a pair from the batch that was fitted with defective seals. Maybe not a good idea to mess with them, as this would almost certainly mean any warranty claim would be impossible.
User avatar
Reinald
A grade participant
A grade participant
Posts: 184
Joined: Wed Sep 09, 2009 11:57 pm
Club: WDTC
Bike: SWM TL320 1982
Location: Springfield

Re: Leaking Betors resolution

Post by Reinald »

Yes good idea Ill run that by SMP and do you ride a virago??
I'd rather be a D grade participant than an A grade spectator....
FM350
Expert participant
Expert participant
Posts: 488
Joined: Thu Apr 14, 2011 7:04 pm
Club: Otter Vale
Bike: Fantic

Re: Leaking Betors resolution

Post by FM350 »

I would be very surprised if SMP dont already know about the faulty shocks, as I heard about these through someone in Spain about 2 months ago.
Takhli44
A grade participant
A grade participant
Posts: 116
Joined: Sun Apr 29, 2012 11:19 pm
Bike: TY 175
Location: South Dakota USA

Re: Leaking Betors resolution

Post by Takhli44 »

I can see where more air pressure might force the sealing lip tighter again the damper rod due to the shape of the lip. Won't cost me anything to try it. If it works, I'll report back here. Trying the pressure on the Falcons not the Betors since they are being replaced.

Thank you folks for the information and the replys. Trials has a great community. That apparently holds true worldwide.

Thirteen sections and loop trail later with topped up oil and 80 PSI, still leaking enough to oil up rhe stop blocks and lower spring support on the Falcons.
Don't let competition get in the way of having fun.
FM350
Expert participant
Expert participant
Posts: 488
Joined: Thu Apr 14, 2011 7:04 pm
Club: Otter Vale
Bike: Fantic

Re: Leaking Betors resolution

Post by FM350 »

Why have a careful look at the damper rods on the Falcons, and if they are ok then strip and rebuild with new seals?
Takhli44
A grade participant
A grade participant
Posts: 116
Joined: Sun Apr 29, 2012 11:19 pm
Bike: TY 175
Location: South Dakota USA

Re: Leaking Betors resolution

Post by Takhli44 »

The Falcons are toast. Minor damage to rods.
Don't let competition get in the way of having fun.
FM350
Expert participant
Expert participant
Posts: 488
Joined: Thu Apr 14, 2011 7:04 pm
Club: Otter Vale
Bike: Fantic

Re: Leaking Betors resolution

Post by FM350 »

You can buy replacement rods if required, and parts to rebuild may well be a lot less money than either new Falcons or even cheap throwaways.
Takhli44
A grade participant
A grade participant
Posts: 116
Joined: Sun Apr 29, 2012 11:19 pm
Bike: TY 175
Location: South Dakota USA

Re: Leaking Betors resolution

Post by Takhli44 »

Final resolution: New Betors arrived today, Tryals Shoppe paid shipping to me, I pay shipping of old shocks back to Trials Shoppe. A fair deal all around I'd say.

New shocks have dark purple seals and 12mm damper rods, old leakers have black seals and 10.5mm rods, close as I can measure.
Don't let competition get in the way of having fun.
petenz
Junior participant
Junior participant
Posts: 8
Joined: Tue Jul 03, 2012 10:25 am
Bike: 77 montesa Cota 348
Location: NZ

Re: Leaking Betors resolution

Post by petenz »

I have just ordered some Betors from Sammy miller... They said all the new one they
are selling now have the new seals... They have had to replace a few sets...
Post Reply