06 Crack...Am I the first???

Got a technical question? Ask it in here.

Moderator: Moderators

User avatar
Neo
Expert participant
Expert participant
Posts: 444
Joined: Fri Dec 31, 2004 1:27 pm
Club: TCC
Bike: 06 Sherco 250
Location: Central Coast, NSW

Re: 06 Crack...Am I the first???

Post by Neo »

Bugger that makes 3 bikes I know of. :(

Best of balance.

Neo
"Nothing more and nothing less than the vision of success"..... Ryan Leech
"TRIALS....It's not life or death....It's much more serious than that!!".....
Mozzie
Junior participant
Junior participant
Posts: 2
Joined: Thu Dec 30, 2004 10:01 am
Club: MCTC
Bike: Gasser 280
Location: Bayside Brisbane

Re: 06 Crack...Am I the first???

Post by Mozzie »

Hi, a mate of mine has an 06 Sherco with the same crack, it was not noticed for a while because it also cracked across the left hand side of the frame where the upright meets the top section. I guess this is where the load transfers to when the cross piece lets go. This sounds like a common fault for Sherco frames...
yamfan
B grade participant
B grade participant
Posts: 96
Joined: Thu Dec 27, 2007 12:58 pm
Club: pathfinders/ajs
Bike: Various

Re: 06 Crack...Am I the first???

Post by yamfan »

I also had a crack across the left hand side of the frame where the upright meets the top section on both my 99 and 00 sherco's I had them both tigged and they never split again.
nic g
Junior participant
Junior participant
Posts: 8
Joined: Sat Jun 23, 2007 8:21 am
Location: Brisbane

Re: 06 Crack...Am I the first???

Post by nic g »

an engineer friend has recommened making a plate to go behind to act like a double skin? I might try that and see how I go?

nic
User avatar
Neo
Expert participant
Expert participant
Posts: 444
Joined: Fri Dec 31, 2004 1:27 pm
Club: TCC
Bike: 06 Sherco 250
Location: Central Coast, NSW

Re: 06 Crack...Am I the first???

Post by Neo »

nic g wrote:an engineer friend has recommened making a plate to go behind to act like a double skin? I might try that and see how I go?

I won't bother Nic. Go to someone who is good with a TIG. As welding straight along the crack would be the best and simplest way to go. Do not compress the sides of the frame to close the gap.

I had mine done with the forks still in place. I just removed the rad and CDI. And kept the wires well out of the way. The burnt area was only 2cm wide and was easy to spray paint.


Best of balance.

Neo
"Nothing more and nothing less than the vision of success"..... Ryan Leech
"TRIALS....It's not life or death....It's much more serious than that!!".....
Scudo
Junior participant
Junior participant
Posts: 1
Joined: Thu Sep 04, 2008 3:02 am
Club: Guisborough
Bike: Sherco

Re: 06 Crack...Am I the first???

Post by Scudo »

Just replying to your request on the Trials Central website.
Some of the earlier 06 frames did have a problem and were changed under warranty in the Uk. The later frames have additional strengthening behind the cross member that has cracked.
nic g
Junior participant
Junior participant
Posts: 8
Joined: Sat Jun 23, 2007 8:21 am
Location: Brisbane

Re: 06 Crack...Am I the first???

Post by nic g »

thanks Neo

I'll get onto that as soon as I can stop riding long enough to pull it apart! it's going to be tough :D

nic
User avatar
Neo
Expert participant
Expert participant
Posts: 444
Joined: Fri Dec 31, 2004 1:27 pm
Club: TCC
Bike: 06 Sherco 250
Location: Central Coast, NSW

Re: 06 Crack...Am I the first???

Post by Neo »

Hi Nic,

Looks I might have mislead you...sorry about that. As my one has cracked again.

Did your engineering friend come up with a design for a strengthening plate?


Best of balance.

Neo
"Nothing more and nothing less than the vision of success"..... Ryan Leech
"TRIALS....It's not life or death....It's much more serious than that!!".....
Rob W
A grade participant
A grade participant
Posts: 102
Joined: Thu Nov 25, 2004 2:23 pm
Club: WDTC
Location: "Rockatoo" near Esk, Queensland

Re: 06 Crack...Am I the first???

Post by Rob W »

Hey Neo I just thought of another fix.......stop practising so much :wink:
Rob

Ca plane pour moi
User avatar
Neo
Expert participant
Expert participant
Posts: 444
Joined: Fri Dec 31, 2004 1:27 pm
Club: TCC
Bike: 06 Sherco 250
Location: Central Coast, NSW

Re: 06 Crack...Am I the first???

Post by Neo »

Rob W wrote:.......stop practising so much :wink:


It would be like asking me to stop breathing :shock: ...."good idea" some would say :lol:

Great to see you're in good spirit my friend =D>


Best of balance.

Neo
"Nothing more and nothing less than the vision of success"..... Ryan Leech
"TRIALS....It's not life or death....It's much more serious than that!!".....
Post Reply