PM ....on it's way 
Best of balance.
Neo
8.5mm Spring Wire???
Moderator: Moderators
-
Neo
- Expert participant
- Posts: 444
- Joined: Fri Dec 31, 2004 1:27 pm
- Club: TCC
- Bike: 06 Sherco 250
- Location: Central Coast, NSW
Re: 8.5mm Spring Wire???
PM ....on it's way Best of balance.
Neo
"Nothing more and nothing less than the vision of success"..... Ryan Leech
"TRIALS....It's not life or death....It's much more serious than that!!".....
"TRIALS....It's not life or death....It's much more serious than that!!".....
-
Scorps
- A grade participant
- Posts: 146
- Joined: Wed Jun 18, 2003 6:58 pm
- Club: Maryborough Riders
- Bike: 1976 KT250
- Location: 20% Maryborough / 80% Karratha
Re: 8.5mm Spring Wire???
Howdy Y'all,
How Howie! How's it going old mate? Quick question for you. Do you have some specs on the titanium you got lying around? What alloy is it?
Cheers,
Your friendly neighbourhood ScorpaMan,
Scorps
How Howie! How's it going old mate? Quick question for you. Do you have some specs on the titanium you got lying around? What alloy is it?
Cheers,
Your friendly neighbourhood ScorpaMan,
Scorps
Children are smarter than any of us. Know how I know that? I don't know one child with a full time job and children.
1981 Fantic 240 Professional
1976 Kawasaki KT250 (x2)
1975 Kawasaki KT250
1975 Kawasaki KT250
1981 Fantic 240 Professional
1976 Kawasaki KT250 (x2)
1975 Kawasaki KT250
1975 Kawasaki KT250
-
Neo
- Expert participant
- Posts: 444
- Joined: Fri Dec 31, 2004 1:27 pm
- Club: TCC
- Bike: 06 Sherco 250
- Location: Central Coast, NSW
Re: 8.5mm Spring Wire???
You see Howard....It wasn't only my leg you where pulling 
Best of balance.
Neo
Best of balance.
Neo
"Nothing more and nothing less than the vision of success"..... Ryan Leech
"TRIALS....It's not life or death....It's much more serious than that!!".....
"TRIALS....It's not life or death....It's much more serious than that!!".....
Re: 8.5mm Spring Wire???
Ah !!!!! it`s round and silver looking,with a lovely slight purple to aqua tinge, very light. But not so light that it floats. Those specs should do ya Scorps, hope that wasn`t too technical
Sorry fellas ,had to get you`se to bite. Though I do have a huge supply of CRF Titanium inlet valves, we could melt together, grind off the big flat bits and wrap it round a piece of steam pipe. Think Neo would need to get down to 40 kg to run that one though.
Cheers,
ShercoH.
Sorry fellas ,had to get you`se to bite. Though I do have a huge supply of CRF Titanium inlet valves, we could melt together, grind off the big flat bits and wrap it round a piece of steam pipe. Think Neo would need to get down to 40 kg to run that one though.
Cheers,
ShercoH.
ShercoH
I`m a pupil of experience !!
I`m a pupil of experience !!
Re: 8.5mm Spring Wire???
hey neo,
why don't you sava da money & get a jitsie trp shock from kal daley??
follow jitsie add on this site.
can then put the non neo modified shock back in the bike when you want to sell it.
if you talk to kal, you will find the trp shocks are available with different springs (57kg!!), are fully rebuildable. and with different bushings are most likely able to be fitted to gassers.
then nikki can use it too!!
why don't you sava da money & get a jitsie trp shock from kal daley??
follow jitsie add on this site.
can then put the non neo modified shock back in the bike when you want to sell it.
if you talk to kal, you will find the trp shocks are available with different springs (57kg!!), are fully rebuildable. and with different bushings are most likely able to be fitted to gassers.
then nikki can use it too!!