Need help finding information or parts for that old machine in your shed? Someone in here will know!
Moderator: Moderators
-
Bigem
- B grade participant

- Posts: 53
- Joined: Tue Jun 23, 2009 5:55 pm
- Bike: Looking!
Post
by Bigem »
Just about finished.
Decided not to go with the Kawasaki green/white for the time being, I am running out of time to get it semi-sorted before CD8.
And after all, the bike has to share the shed with quite a few yellow-ish bikes........


-
David Lahey
- Champion

- Posts: 4116
- Joined: Thu Jun 05, 2003 7:01 pm
- Club: CQTC Inc, RTC Inc
- Bike: Many Twinshocks
- Location: Gladstone, Queensland
Post
by David Lahey »
Very swish and distinctive
relax, nothing is under control
-
Bigem
- B grade participant

- Posts: 53
- Joined: Tue Jun 23, 2009 5:55 pm
- Bike: Looking!
Post
by Bigem »
It looks pretty good in the flesh.
I was pleasantly surprised when it started 2nd kick and sat there idling away like a bought one.
New crankcase seals and a carby kit have freshened it up a bit(top end was new anyway)
Once I bled the autolube pump I took it for a ride and its surprisingly punchy off the bottom, not TL320 punchy, but okay.
Has no brakes to speak of, but I suspected that would be the case.
I will throw some new shoes in, the old ones where borderline but thought I would see how they where: no good.
I think its going to be a great bike and am looking forward to spending many hours on it.
-
NonstopRoss
- C grade participant

- Posts: 28
- Joined: Wed Mar 16, 2011 8:26 pm
- Club: Waitemata
- Bike: TL250
Post
by NonstopRoss »
Hi
Great job. I've just had some issues with my own front mudguard. What bracket did you use?
Ross
It all started with a KT250 that was so light that it once floated away during an ambitious river crossing.
-
Bigem
- B grade participant

- Posts: 53
- Joined: Tue Jun 23, 2009 5:55 pm
- Bike: Looking!
Post
by Bigem »
I got lazy Ross and just drilled the new guard to fit the original centre bracket that holds the brake adjuster.
Its got just a little bit of flex in the guard but it works just fine.
The after-market guard isn't quite as wide as the original guard.
My original guards are quite good so I will get them cleaned up for when it becomes a green bike again.