Sherco 80 wont idle!

Got a technical question? Ask it in here.

Moderator: Moderators

Post Reply
MOTNEB
Junior participant
Junior participant
Posts: 3
Joined: Mon Oct 08, 2007 9:48 pm
Bike: Scorpa SY250F
Location: Narrabeen,NSW

Sherco 80 wont idle!

Post by MOTNEB »

Just bought my son a great little sherco 80 (2004). But have a problem getting an even idle. If he lets the throttle go the engine fades. Once its going all is well except for the idle. Can you give me a quick list of things to check. The carby is a Dellorto.
Knobhead
Junior participant
Junior participant
Posts: 1
Joined: Fri Jul 17, 2009 8:36 pm
Bike: TLR 250

Re: Sherco 80 wont idle!

Post by Knobhead »

Hey Motneb,Try cleaning the carby and fresh fuel and airfilter first then hold a slight throttle to get it to run at fast idle and squirt dwf or similiar around inlet manifold.If idle goes down replace manifold.Also always check exhaust for collapsing inside or Mud wasps/insects etc..
See how ya go..How much compression has it got.does it start easier hot or cold?..Cheers
MOTNEB
Junior participant
Junior participant
Posts: 3
Joined: Mon Oct 08, 2007 9:48 pm
Bike: Scorpa SY250F
Location: Narrabeen,NSW

Re: Sherco 80 wont idle!

Post by MOTNEB »

Thanks man. I will try it out and see how I go. Have just removed the carby and will blow out with compressed air.
Thanks again
MOTNEB
Junior participant
Junior participant
Posts: 3
Joined: Mon Oct 08, 2007 9:48 pm
Bike: Scorpa SY250F
Location: Narrabeen,NSW

Re: Sherco 80 wont idle!

Post by MOTNEB »

Oh yes compression seem good. It only starts with choke even when HOT?
Post Reply