Page 1 of 1
TY175 Reart Guard
Posted: Thu Jul 30, 2009 7:56 pm
by Warren
Hi All
I picked up a Parts book for my TY175 the other day & noticed that it showed a bracket for the rear guard that sit's under the guard itself. Question is do I need it?
Cheers
Re: TY175 Reart Guard
Posted: Thu Jul 30, 2009 8:03 pm
by David Lahey
That bracket is to hold the weight of the tail-light. There are two bracket types. The type for the TY175JC is a massive affair to suit the nutcruncher tail-light they came with and the TY175B and C came with a much smaller, lighter bracket.
Unless you are going to use a tail light they are not needed or recommended.
Re: TY175 Reart Guard
Posted: Fri Jul 31, 2009 4:09 am
by Warren
David Lahey wrote:That bracket is to hold the weight of the tail-light. There are two bracket types. The type for the TY175JC is a massive affair to suit the nutcruncher tail-light they came with and the TY175B and C came with a much smaller, lighter bracket.
Unless you are going to use a tail light they are not needed or recommended.
G'day David
Thanks for the help.
Cheers