Wanted, bit for my Techno

[Shawn James]

Barrell and piston to suit BETA Techno, a 94 model {the yellow and black one}
i've been having problems with water in the oil and water in the exhaust.
thers is chip and crack in the barrell right on the inner o-ring and the gases are putting pressure on the coolent system and forcing water past the seal into the gear box, as long with sucking some down the barrell and out the back.
So what i'm needing is a good condition barrell and piston to replace mine. hopfully this will fix it.
Shawn
0409 475 111
A/H 46 380 427
[email protected]
Shawn from T-bar {Toowoomba}
{There must be bits out there somewhere}