Trials Australia Forums

Hi,
Recently bought a sherco 290 06 and wondering whether anyone knew of anywhere to get a workshop manual or genuine manual.
Also what brand oils would you recommend in the fuel mixture, I've read most fully synthetic oils should be fine at around 80:1.
Thanks a lot.

HI Cano.

Sherco have manuals on line at http://www.sherco.com

http://www.sherco.com/EN/service_manuals.html

and service manuals go to

http://www.sherco.com/EN/service_manuals.html

Parts book

http://www.sherco.com/EN/spare_parts.html

Motocentral and myself use Motorex oils at (80:1)

http://www.trialzone.com.au/categories. ... =47&c=9531

Hope this helps

Thanks a lot,
Yeah I've had a look at those sherco manuals and can't find one for the 06, I've got the parts manual but it's not of that much use
to me. Thanks for the help.

Hi Cano.

I would use the 2009 manual, the 2006 sherco motor had similar specs to the 2009 model.

If i find a 2006 original manual i will let you know.

Scott

Thanks very much.

Cano,
See bottom of this web page
http://www.shercousa.com/content2.cfm?action=9