Trials Australia Forums

I need to replace the bearings and bushes on my TLM260 swing arm linkage
The parts I need are in the middle of the 3 bearing sets on the linkage.

The bearing is OD 23mm, ID 17mm and L 20mm

The top hat hardened sleeve that the bearing runs on is also rubbish.

This is OD 17MM, ID 12MM, overall length 29mm

Does anyone have the Honda part numbers or a source of parts, fitted to another model perhaps?
They may be the same as the earlier TLM 200, 220, 240 etc but I do not know.

Many thanks,
Matt

Hi Matt,
TLM200's use a bush not rollers, here is a list of part numbers used in TLM 220's (needle rollers)
acording to google these fit a lot of other model honda's so they may fit the TLM260

inner bush/shaft
1 off 52463 KR8 750
1 off 52464 KR8 750
1 off 52464 KW3 000
1 off 52476 KR8 750
roller bearings
1 off 90179 KA3 831
4 off 90179 KN5 003

cheers
Gary Mc