Tachometer problems on Beta EVO
Posted: Sat Jun 21, 2014 8:28 pm
Hey all,
I've installed a Tachometer [Hardline Hour/Tach] onto my Beta but the RPM it's showing is way off. When I touch the wire in any mode (near the spark plug end) with my fingers it drops by a factor of x2. Am I missing something?
The tach supports the following modes:
* 1 pulse = 1 revolution
* 2 pulses = 1 revolution
* 1 pulse = 2 revolutions
RPM shown in the following mode:
* 1 pulse = 1 revolution (4000rpm)
* 2 pulses = 1 revolution (2000rpm) (drops to 1000 rpm, when wires are touched)
* 1 pulse = 2 revolutions (8000rpm)
Any ideas?
If you are currently using a tach/hour meter with great success what brand/mode?
Thanks!
I've installed a Tachometer [Hardline Hour/Tach] onto my Beta but the RPM it's showing is way off. When I touch the wire in any mode (near the spark plug end) with my fingers it drops by a factor of x2. Am I missing something?
The tach supports the following modes:
* 1 pulse = 1 revolution
* 2 pulses = 1 revolution
* 1 pulse = 2 revolutions
RPM shown in the following mode:
* 1 pulse = 1 revolution (4000rpm)
* 2 pulses = 1 revolution (2000rpm) (drops to 1000 rpm, when wires are touched)
* 1 pulse = 2 revolutions (8000rpm)
Any ideas?
If you are currently using a tach/hour meter with great success what brand/mode?Thanks!