Lanyard fitting advice please

[Ron-one]

I have a 2012 OSSA TR280i that I want to fit a Leonelli lanyard switch to, can anyone please advise how to connect the wires in ? Any assistance would be most appreciated, thanks.

[Stout]

Follow the wires from your existing kill switch down to the bundle tucked into the frame head on the left hand side. Pull the bundle out and unravel it to find the connectors, you'll probably have to remove a cable tie or two. The connectors on the bike and the Lanyard kill switch are different and I chose (habit) to leave the bike side original and change the connectors on the new kill switch wires. Think I found something suitable at Jaycar. It doesn't matter which wire goes to which. I sealed my connections with heat shrink. Hope this helps.

[Ron-one]

Thanks for the advice, will give it a try. If not successful, will be back. Cheers