what do size is the front sprocket?
Guy

I use ATF ( Ford ) in mine. When I change the oil, I drain and let the bike on a stand overnight than fill with fresh ATF run for a couple of hours than repeat The oil change. Maybe it's overkill but I had good result.
Guy

The '' nicer '' is a bike to ride the more you want to ride it. Good job David.

Guy

The final decision was made by the '' commity of rebuld '': the crank was sent to a specialise shop to be rebuld. they will check if the job is doable and if so, they will overall it. It's not cheap, but they are very reliable place.

JC1 as the DT piston did not have the bottom of the skirt '' besseld '' as the TY ones, you certainly are right about the early DT but I was thinking about a late ( 1979 here in Canada ) one. Since the crank in question is about 500 miles from our place and not being sure that the seller will give ...

I have a couple of A model crankshaft here so we will have a look at the drive side half to see if it is still usable. The bike aparently was droped in a streem and left to rested for a long time, it took a lot of persuation to finaly '' unseize '' and take it appart.
Thank you for the offer to sell ...

David, the DT 400 B is listed with a 70mm stroke, if I want to replace the crank in a TY 250 B and keep it standard, what choise do I have ?
We have looked all over the place to find a replcement for that crank, but can't find anyting.
Guy

Does anybody kbows if a DT crankshaft fit a TY 250 model 493 B model here in Canada

Guy

Super nice
Guy

Are yu sure about the MT43 as they don't have '' square '' center knob
Guy